Products
- Milling machines
- Presses
- Band saw cutting machines
- Drilling machines
- Slotting machines
- Lathes
- Oil country lathes
- Grinding machines
- Woodworking machines
- Other
- Cranes and hoists
- Sheet metal deburring & Tube deburring machines
- Polishing machines
- Pipe notching machines
- Bevelling machines
- Sharpening machines
- Dust Extractors
Contacts
Russia
119285 Moscow, Pirieva str.
Warehouse: Moscow, Shcherbinka,
Zheleznodorozhnaya str. 24
Tel:
+7(926) 11 54 2 54
+7(915) 47 96 6 32
+7(499) 14 30 4 50
+7(499) 14 32 7 56
Other equipment
»
CU660
Technical specification of CU660
| Technical data | Dim. | Value |
|---|---|---|
| Height of centers | mm | 330 |
| Swing diameter over bed | mm | 660 |
| Swing diameter over carriage | mm | 420 |
| Swing diameter over gap in bed | mm | 900 |
| Width of ways | mm | 560 |
| Distance between centers | mm | 2000, 3000, 4000, 5000, 6000 |
| Bar material | mm | 128 |
| Spindle | ||
| Spindle nose DIN 55027 | № | 11 |
| Spindle nose taper | mm | 130 |
| Spindle bore | metric | 140 |
| Feed | ||
| Feed quantity | pcs. | 192 |
| Longitudinal feed range | mm/rev | 0,032 - 29,18 |
| Transverse feed range | mm/rev | 0,016 - 14,59 |
| Toolpost | ||
| Toolpost shank size | mm | 32x32 |
| Threads | ||
| Thread quantity | pcs. | 384 |
| Metric | mm | 0,5-360 |
| Imperial | Tpi | 0,08-60 |
| Module | M | 0,125-90 |
| Diameter | vit / inch | 0,33-240 |
| Carriage | ||
| Cross slide stroke | mm | 395 |
| Top slide stroke | mm | 150 |
| Tailstock | ||
| Tailstock diameter | mm | 95 |
| Tailstock taper | KM | 6 |
| Tailstock travel | mm | 225 |
| Motor | ||
| Number of gears of main motor | pcs. | 15 |
| Range of motor revolutions | rev / min | 8-1050 |
| Motor power | kW | 11, 15 |
| Rapid traverse motor power | kW | 0,55 |
| Coolant pump motor power | kW | 0,09 |
| Weight | ||
| For DBC 2000 | kg. | 4600 |
Standard equipment
Main drive motor 11 KW, Electrical equipment, Cooling system with pump, Lighting, Rapid traverse, Gap in bed, Monolith bed, 400mm. flange, Back cover along lathe, Chuck cover plate, Toolpost cover, Set of belts, Spare cogwheel, Bolts and fittings for leveling, Spindle dead center, Reduction sleeve for spindle, 4-positional toolpost, 1-position trailing stop, Fast-screwing tailpost, Reductor for tailpost ram, Case for accessories, Wooden pallet with polyethylene cover packaging, Users manual, Mechanized tailstock