Products
- Milling machines
- Presses
- Band saw cutting machines
- Drilling machines
- Slotting machines
- Lathes
- Oil country lathes
- Grinding machines
- Woodworking machines
- Other
- Cranes and hoists
- Sheet metal deburring & Tube deburring machines
- Polishing machines
- Pipe notching machines
- Bevelling machines
- Sharpening machines
- Dust Extractors
Contacts
Russia
119285 Moscow, Pirieva str.
Warehouse: Moscow, Shcherbinka,
Zheleznodorozhnaya str. 24
Tel:
+7(926) 11 54 2 54
+7(915) 47 96 6 32
+7(499) 14 30 4 50
+7(499) 14 32 7 56
Other equipment
»
C1030
Technical specification of C1030
| Technical data | Dim. | Value |
|---|---|---|
| Height of centers | mm | 520 |
| Swing diameter over bed | mm | 1040 |
| Swing diameter over carriage | mm | 720 |
| Swing diameter over gap in bed | mm | 1300 |
| Width of ways | mm | 750 |
| Distance between centers | mm | 1500, 2250, 3000, 3750, 4500, 5250, 6000, 7000, 8000 |
| Bar material | mm | 150 |
| Spindle | ||
| Spindle nose DIN 55027 | № | 15 |
| Spindle nose taper | mm | 152 |
| Spindle bore | metric | 160 |
| Feed | ||
| Feed quantity | pcs. | 96 |
| Longitudinal feed range | mm/rev | 0,055 - 13,3 |
| Transverse feed range | mm/rev | 0,02 - 4,45 |
| Toolpost | ||
| Toolpost shank size | mm | 40x40 |
| Threads | ||
| Thread quantity | pcs. | 96 |
| Metric | mm | 0,5-120 |
| Imperial | Tpi | 0,5-60 |
| Module | M | 0,125-30 |
| Diameter | vit / inch | 1-240 |
| Carriage | ||
| Cross slide stroke | mm | 585 |
| Top slide stroke | mm | 300 |
| Tailstock | ||
| Tailstock diameter | mm | 145 |
| Tailstock taper | KM | 6 |
| Tailstock travel | mm | 300 |
| Motor | ||
| Number of gears of main motor | pcs. | 16 |
| Range of motor revolutions | rev / min | 4,5-800 |
| Motor power | kW | 18, 22, 30 |
| Rapid traverse motor power | kW | 1,1 |
| Coolant pump motor power | kW | 0,18 |
| Weight | ||
| Size | ||
Standard equipment
Main drive motor 18 KW, Electrical equipment, Cooling system with pump, Lighting, Rapid traverse, Gap in bed, Monolith bed, 500mm. flange, Back cover along lathe, 3-jaw chuck cover, Toolpost cover, Cog-belt system, Set of belts, Spare cogwheel, Bolts and fittings for leveling, Spindle dead center, Reduction sleeve for spindle, 4-positional toolpost, Fast-screwing tailpost, Reductor for tailpost ram, Electrodynamic brake, Case for accessories, Auto feed on the upper slide, Wooden pallet with polyethylene cover packaging, Users manual, Tailstock with electrical motor