Products
- Milling machines
- Presses
- Band saw cutting machines
- Drilling machines
- Slotting machines
- Lathes
- Oil country lathes
- Grinding machines
- Woodworking machines
- Other
- Cranes and hoists
- Sheet metal deburring & Tube deburring machines
- Polishing machines
- Pipe notching machines
- Bevelling machines
- Sharpening machines
- Dust Extractors
Contacts
Russia
119285 Moscow, Pirieva str.
Warehouse: Moscow, Shcherbinka,
Zheleznodorozhnaya str. 24
Tel:
+7(926) 11 54 2 54
+7(915) 47 96 6 32
+7(499) 14 30 4 50
+7(499) 14 32 7 56
Other equipment
C400TM
Technical specification of C400TM
|
Technical data |
Dim. |
Value |
|
|
|
|
|
Height of centers |
mm |
200 |
|
Swing over bed |
mm |
400 |
|
Swing over cross slide |
mm |
235 |
|
Swing in gap |
mm |
550 |
|
Width of bed |
mm |
320 |
|
Distance between centers |
mm |
750; 1000; 1500 |
|
Bar material |
mm |
50 |
|
Spindle |
||
|
Spindle nose DIN 55027 |
№ |
6 |
|
Spindle bore |
mm |
52 |
|
Spindle taper |
Morse |
№ 6 |
|
Feeds |
||
|
Number of feeds |
|
80 |
|
Longitudinal feed range |
mm/rev |
0.015-0.6 |
|
Cross feed range |
mm/rev |
0.0075-0.3 |
|
Toolpost |
||
|
Toolpost shank size |
mm |
20x20 |
|
Threads |
||
|
Number of threads |
|
40 |
|
Metric thread range |
mm |
0.25-7.5 |
| Inch thread range | Tpi | 120-4 |
| Module thread range | Module | 0.0625-1.875 |
| DP thread range | DP | 480-16 |
|
Carriage |
||
|
Cross slide travel |
mm |
235 |
|
Top slide travel |
mm |
110 |
|
Tailstock |
||
|
Quill diameter |
mm | 50 |
|
Quill taper |
Morse | № 4 |
|
Quill travel |
mm | 100 |
|
Motor |
||
| Number of gears of main motor | 12 | |
| Range of motor revolutions | rpm | 50-2240 |
| Main motor power | kW | 4 |
| Coolant pump motor power | kW | 0.18 |
| Weight | ||
| For DBC 750, 1000, 1500 | kg | 1600, 1650, 1700 |
| Size | ||
| Length for DBC 750, 1000, 1500 |
mm | 2100, 2350, 2850 |
| Width | mm | 980 |
| Height | mm |
1285 |
Standard equipment
Main Motor 4KW, Electrical equipment, Coolant system with pump, Lighting, Rapid traverse, Monolith bed, Gap bed, 200mm flange, Back cover plate along bed, 3 jaw chuck cover plate, Toolpost cover plate, Set of belts, spare cogwheel, Bolts and fittings for leveling, spindle dead center, Reduction sleeve for spindle, 4 positional toolpost, Fast-screwing tailpost, Reductor for tailpost ram, Single point trailing stop, Case for accessories, Polyethilene covered pallet packing, Users manual
Optional acceessory
3-JAW selfcentering chuck, Independent 4-JAW chuck, Face plate, Followe rest, Steady rest (small size), Taper turning attachm., One-position long. stop, Thread dial, Drive plate for spindle nose DIN 55027, Set of lathe dogs, Live center, Drill chuck with arbor.