CU730RD
Manufacturer:
ZMM Bulgaria Holding Jsc.
Technical specification of CU730RD
|
Technical data |
Dim. |
Value |
|
|
|
|
|
Height of centers |
mm |
365 |
|
Swing over bed |
mm |
730 |
|
Swing over cross slide |
mm |
500 |
|
Swing in gap |
mm |
930 |
|
Width of bed |
mm |
400 |
|
Distance between centers |
mm |
1000; 1500; 2000; 3000; 4000; 5000 |
|
Bar material |
mm |
100 |
|
Spindle |
||
|
Spindle nose DIN 55027 |
№ |
11 |
|
Spindle bore |
mm |
103 |
|
Spindle taper |
Metric |
120 |
|
Feeds |
||
|
Number of feeds |
|
120 |
|
Longitudinal feed range |
mm/rev |
0.04-12 |
|
Cross feed range |
mm/rev |
0.02-6 |
|
Toolpost |
||
|
Toolpost shank size |
mm |
32x32 |
|
Threads |
||
|
Number of threads |
|
64 |
|
Metric thread range |
mm |
0.5-120 |
| Inch thread range | Tpi | 60 – ¼ |
| Module thread range | Module | 0.125-30 |
| DP thread range | DP | 240 - 1 |
|
Carriage |
||
|
Cross slide travel |
mm |
390 |
|
Top slide travel |
mm |
130 |
|
Tailstock |
||
|
Quill diameter |
mm | 90 |
|
Quill taper |
Morse | № 5 |
|
Quill travel |
mm | 230 |
|
Motor |
||
| Number of gears of main motor | Infinitely variable in 3 sub-ranges | |
| Range of motor revolutions | rpm | 16-63; 63-250; 315-1250 |
| Main motor power | kW | 11 |
| Weight | ||
| For DBC 2000 | kg | 3310 |
Standard equipment
Main Motor 11 KW with frequency inverter Schneider 400V, 3-phase 50/60 Hz, Electrical equipment, Cooling system with pump, Lighting, Rapid traverse, Gap in bed, 315mm. flange, Back cover along lathe, Chuck cover plate, Toolpost cover, Set of belts, Spare cogwheel, Bolts and fittings for leveling, Spindle dead center, Reduction sleeve for spindle, 4-positional toolpost, 1-position trailing stop, Fast-screwing tailpost, Case for accessories, Wooden pallet with polyethylene cover packaging, Users manual.
Optional acceessory
3-JAW selfcentering chuck, Independent 4-JAW chuck, Face plate, Followe rest, Steady rest (small size), Steady rest (big size), Taper turning attachm., One-position long. stop, Thread dial, Drive plate for spindle nose DIN 55027, Set of lathe dogs, Live center, Drill chuck with arbor.