C10T.10
Manufacturer:
ZMM Bulgaria Holding Jsc.
Technical specification of C10T.10
|
Technical data |
Dim. |
Value |
|
|
|
|
|
Height of centers |
mm |
400 |
|
Swing over bed |
mm |
800 |
|
Swing over cross slide |
mm |
560 |
|
Swing in gap |
mm |
990 |
|
Width of bed |
mm |
560 |
|
Distance between centers |
mm |
1500; 2000; 3000; 4000; 5000; 6000 |
|
Spindle |
||
|
Spindle nose DIN 55026 — ANSI B5.9 |
№ |
A20-A2.20 |
|
Spindle bore |
mm |
260 |
|
Spindle taper |
Metric |
318 |
|
Feeds |
||
|
Number of feeds |
|
152 |
|
Longitudinal feed range |
mm/rev |
0.039-15 |
|
Cross feed range |
mm/rev |
0.02-7.5 |
|
Threads |
||
|
Number of threads |
|
76 |
|
Metric thread range |
mm |
0.5-150 |
| Inch thread range | Tpi | 60 - 1/5 |
| Module thread range | Module | 0.125-37.5 |
| DP thread range | DP | 240-4/5 |
|
Carriage |
||
|
Cross slide travel |
mm |
410 |
|
Top slide travel |
mm |
150 |
|
Tailstock |
||
|
Quill diameter |
mm | 105 |
|
Quill taper |
Morse | № 6 |
|
Quill travel |
mm | 225 |
|
Motor |
||
| Number of gears of main motor | 12 | |
| Range of motor revolutions | rpm | 8-400 (10-480) |
| Main motor power | kW | 11 (15) |
| Weight | ||
| For DBC 2000 | kg | 6000 |
Standard equipment
Main drive motor, Electrical equipment, Cooling system with pump, Lighting, Rapid traverse, Gap in bed, Flange, Back cover along lathe, 3-jaw chuck cover, Toolpost cover, Set of belts, Spare cogwheel, Bolts and fittings for leveling, Spindle dead center, Reduction sleeve for spindle, 4-positional toolpost, Reductor for tailpost ram, Trailing stop-pole, Case for accessories, Wooden pallet with polyethylene cover packaging, Users manual.
Optional acceessory
3-JAW selfcentering chuck, Independent 4-JAW chuck, Followe rest, Steady rest (small size), Steady rest (big size), Taper turning attachm., One-position long. stop, Thread dial, Live center.