KZM 2
Manufacturer:
ZMM Stomana
Technical specification of KZM 2
|
Technical data |
dim. |
value |
|
|
|
|
|
Work table size |
mm |
1400x600 |
|
Front/back extension table size |
mm |
400x380 |
|
Thickness of the panel |
mm |
10-45 |
|
Work panel size (min) - lenght x width |
mm |
300x90 |
|
Feeding speed of the automatic feeding device |
m/min |
5 |
| Roller carrier |
mm |
600 |
| Cutting circular discs– 2 pcs. |
mm |
80x20x2.4/3, Z=16 |
| Circular discs turnovers | Min-1 | 9000 |
| Milling heads– 2 pcs. | mm | 75, Z=4, R3 |
| Milling heads turnovers | Min-1 | 9000 |
| Aspirating port diameter | mm | 120 |
| General power of the glue heaters | кW | 1.260 |
| General installed power | кW | 2.400 |
| Supplying voltage (3 phases) | V | 380-440 |
| Frequency | Hz | 50 |
| Pressure of the air | Bar | 6.5 |
| Size | ||
| Weight | kg | 410 |
| Required area | m | 2x3.5 |
Standard equipment
The machine is designed for edgebanding of straight panels. It is with automatic panel feed and direct covering with glue for edges with thickness from 0.4 mm to 3 mm and panel thickness from 10 to 45 mm .Automatic trimming of edge’s extras at both panel sides and removing the surplus parts of the edge up and down of the workable panel. There are digital indicators of fence, of milling cutting device, of feeder for height adjustment, electronic regulation of glue temperature with microprocessor and digital thermometer , sliding support for edgebanding of wider panels, compressed air regulator.
Optional equipment
800mm diameter roller holder, Trolley for machine moving.