KZM 2P
Manufacturer:
ZMM Stomana
Technical specification of KZM 2P
|
Technical data |
dim. |
value |
|
|
|
|
|
Work table size |
mm |
1550x600 |
|
Front/back extension table size |
mm |
400x380 |
|
Thickness of the panel |
mm |
10-45 |
|
Work panel size (min) - lenght x width |
mm |
300x90 |
|
Feeding speed of the automatic feeding device |
m/min |
5 |
| Roller carrier |
mm |
600 |
| Edge trim unit - cutting circular discs– 2 pcs. |
mm |
80x20x2.4/3, Z=16 |
| - power of the motor |
kW |
0.25 |
| - RPM of the moror | Min-1 | 9000 |
| Milling unit - milling heads – 2 pcs. | mm | 75, Z=4, R2 |
| - power of the morot | kW | 0.37 |
| - RPM of the motor | Min-1 | 9000 |
| Polishing unit - polishing discs - 2pcs. | mm | 125x50x25 |
| - power of the motor | kW | 0.18 |
| - RPM of the motor | Min-1 | 2800 |
| Aspirating port diameter | mm | 120 |
| General power of the glue heaters | кW | 1.260 |
| General installed power | кW | 2.760 |
| Supplying voltage (3 phases) | V | 380-440 |
| Frequency | Hz | 50 |
| Pressure of the air | Bar | 6.5 |
| Size | ||
| Weight | kg | 450 |
| Required area | m | 2.5x3.5 |
Standard equipment
The machine is designed for edgebanding of straight panels. It is with automatic panel feed and direct covering with glue for edges with thickness from 0.4 mm to 3 mm and panel thickness from 10 to 45 mm .Automatic trimming of edge’s extras at both panel sides and removing the surplus parts of the edge up and down of the workable panel. There are digital indicators of fence, of milling cutting device, of feeder for height adjustment, electronic regulation of glue temperature with microprocessor and digital thermometer , sliding support for edgebanding of wider panels, compressed air regulator. Buffing unit for cleaning, buffing and smoothing.
Optional equipment
Trimming discs - 2 pcs. 75mm diameter, Z4, R:3 mm, Trolley for machine moving