Contacts

Contacts
Bulgaria

Bulgaria, Sofia 1000
Tsar Simeon Str. 158  At. 2


Tel: +359 /2 /437 2081

 

CONTACTS & MAP 

Russia

119285 Moscow, Pirieva str.


 
Warehouse: Moscow, Shcherbinka,

Zheleznodorozhnaya str. 24

 

Tel: 

+7(926) 11 54 2 54
+7(915) 47 96 6 32
+7(499) 14 30 4 50
+7(499) 14 32 7 56

 

CONTACTS & MAP 

Other equipment

C830C
Manufacturer: ZMM Bulgaria Holding Jsc.
C560C
Manufacturer: ZMM Bulgaria Holding Jsc.
C730C
Manufacturer: ZMM Bulgaria Holding Jsc.
LT580
Manufacturer: ZMM Bulgaria Holding Jsc.
LT660
Manufacturer: ZMM Bulgaria Holding Jsc.
LT760
Manufacturer: ZMM Bulgaria Holding Jsc.
LT C10T.10
Manufacturer: ZMM Bulgaria Holding Jsc.
LT C10T.12
Manufacturer: ZMM Bulgaria Holding Jsc.
LT860
Manufacturer: ZMM Bulgaria Holding Jsc.
TBA660
Manufacturer: ZMM Vratsa
TBA830
Manufacturer: ZMM Vratsa

C630C

Manufacturer:

ZMM Bulgaria Holding Jsc.

ZMM Bulgaria Holding Jsc.

Technical specification of C630C

Technical dataDim.Value
Height of centers mm 280
Swing diameter over bed mm 630
Swing diameter over carriage mm 385
Width of ways mm 520
Distance between centers mm 1000, 1500, 2000, 3000, 4000
Bar material mm 100
Spindle
Spindle nose DIN 55027 11
Spindle nose taper mm 103
Spindle bore metric 120
Quick-change toolpost
Toolpost shank size mm 40x40
Carriage
Cross slide stroke mm 420
Top slide stroke mm 145
Tailstock
Tailstock diameter mm 105
Tailstock taper KM 6
Tailstock travel mm 200
Motor
Number of gears of main motor pcs. 3
Range of motor revolutions rev / min 8-2000
Motor power kW 15, 18,5
CNC System
Optional - Fanuc 0i Mate T, Fagor 8055TC, Siemens 802 Dsl
Weight
For DBC 2000 kg. 4150
Size
Length for DBC 1000, 1500, 2000, 3000, 4000 mm 3150, 3650, 4150, 5150, 6150
Width mm 1600
Height mm 1700

Standard equipment

3 step mechanical gearbox, Main Motor 15 KWH with frequency inverter Siemens/Schneider 400V, 3-phase 50/60 Hz, Longitudinal and cross feed motor same brand as CNC, CNC system optional, Ball screw actuators for the longitudinal and traverse axes, Electrical equipment, Removable control, Cooling system with pump, Lubricating system, Lighting, Monolith bed, Protective cover along lathe, Flange, 3-jaw chuck cover, V-belts, Levelling set, Spindle dead center, Reduction sleeve for spindle, Tailstock dead center, Reductive sleeve for spindle, Quick-change toolpost with TGA R350 toolholder, Tailstock reducible gear, Case for accessories, Wooden pallet with polyethylene cover packaging, Users manual