EIM TRADE

This machine is designed for drilling holes in the rail neck.

This system is intended for warming up of rails to the temperature required for aluminothermic welding.

This trolley is designed for transportation of rails and assembled panels.

This machine is intended for final grinding of aluminothermic welds and for changing the railhead profile.

This machine is designed for mechanized screwing and unscrewing of bolts and nuts.

It is used for drilling boltholes in wooden sleepers.

This machine is intended for use in railroad construction and maintenance works.

Hydraulic nut splitter- HGR-ER is intended for removal of deformed or corroded nuts by cutting.

This chisel is intended for cleaning the welds after butt-welding of rails.

The Petrol Impact Wrench is intended for assembling and disassembling of screw joints with bolts up to 32 mm.

Rail Gap Adjuster DM-2 is used during assembly and repair works on the track.

Rail Gap Adjuster DM-2 is used during assembly and repair works on the track.

This rail jack is intended for lifting and centering of rails during aluminothermic welding.

Sleeper drilling machine – TPM-2SH is intended for drilling holes in wooden sleepers.

Rail cutting machine MRO – H is used during assembly and repair works on the track.

Mechanical lubricator L9 is intended for lubricating rails type P 49. It is installed on curvilinear track sectors. 

The Insulated joints serve as a solid connection between two consecutive rails.

Hydro aggregate 3.6 is used during assembly and repair works on the track.

This two-phase hydraulic hand pump serves as an aggregate by providing operating pressure of P= 35 KPa

Ratchet wrench TG 39 is designed for hand screwing and unscrewing of joint tie nuts.